CFR section

21 CFR 110.20(a)(4): Plant and grounds

PART 110-CURRENT GOOD MANUFACTURING PRACTICE IN MANUFACTURING, PACKING, OR HOLDING HUMAN FOOD · Subpart B-Buildings and Facilities

Key facts

Citation 21 CFR 110.20(a)(4)
Section Plant and grounds
Part PART 110-CURRENT GOOD MANUFACTURING PRACTICE IN MANUFACTURING, PACKING, OR HOLDING HUMAN FOOD
Subpart Subpart B-Buildings and Facilities
Subchapter 21 CFR B Food
Product types cited Biologics, Drugs, Food/Cosmetics, General, Other_Regulations
Regulation text (excerpt) (4) Operating systems for waste treatment and disposal in an adequate manner so that they do not constitute a source of contamination in areas where food is exposed. If the plant grounds are bordered by grounds not under the operator's control and not maintained in the manner described in paragraph (a) (1) through (3) of this section, care shall be exercised in the plant by inspection, extermination, or other means to exclude pests, dirt, and filth that may be a source of food contamination.

At a glance

  • 100–999 Inspections citing this section
  • 1–9 Warning letters citing this section

Counts are shown as ranges. Exact figures, trends and every underlying record are available in Orca1.

About CFR sections cited by the FDA

Title 21 of the Code of Federal Regulations contains the FDA's regulations, including current good manufacturing practice and quality system requirements that inspections cite.

Source: U.S. Code of Federal Regulations (eCFR); citation statistics from FDA inspection and warning-letter data

Browse all CFR sections cited by the FDA